To run SP Write:      1)  Download and unzip "SP Disk".                               2)  Download and un-Zip any Bank from this page into the same folder as" SP Disk".                               3)  Put a blank disk in your computer's floppy disk drive.                               4)  Drag and drop each Disk Image from the un-Ziped Banks into the icon named                                    SPWRITE.EXE. SP Write will write the Image to floppy disk. Insert additional                                    disks (if necessary).                               5)  Load the disk into your SP/SP+.  Enjoy ! To run SP Read:      1)  Download and unzip "SP Disk" into your "C" folder.                               2)  Save the Bank in your SP to floppy disk(s).                               3)  Put the floppy disk in your computer's disk drive.                               4)  Open up your "C" drive and click on the MS-DOS icon named "command".                               5)  Type in: spdisk\spread (leave a space) SP Bank Name .sp  . The SP Bank name must be 8                                     letters\numbers or less. It should look like: C:\>spdisk\spread piano1.sp                               6)  Hit enter, and the program should begin to work. SP Read will write an SP Floppy Disk image                                    file on to your computers "C"disk. This Floppy Disk image can then be posted on a site,                                    emailed, etc. and written back to the SP with SP Write.                               7)  To write multi-disk Banks, name each disk with a different number or letter in the SP Read                                    Text window : Piano1A, Piano1B, Piano 1C, etc. These names refer to the file names of the                                    imaged files once they are in the computer, and do not have to correspond to the names of the                                    SP disks.